These pumps provide a low cost efficient
means for manually developing or
increasing pressure in a hydraulic system.

Whether used as the primary pump for a
hydraulic system, or a standby pump for
emergencies they furnish reliable hydraulic
power to operate presses, valves, doors,
safety locks and other devices.

They are complete pumps with suction and
pressure check valves but without release and overload valve. They are made to mount in your manifold block in a standard SAE
O-ring port and they eliminate the need for
a costly valve body.

The handle socket is free to rotate 360° allowing the pump to be operated from any position around the axial centerline.

Pressures to 5000 PSI Pistons are ground and hard chrome plated Bodies are aluminum Supplied with 18" operating handle